Cameo F2 FC Bedienungsanleitung Seite 8

STAND-ALONE MODE HSI (Hue - Saturation - Intensity)
Starting from the main display, press on the left push button rotary encoder to move to the mode select menu. Rotate the left encoder
(SELECT) to select "HSI" mode (as indicated by selector arrow on left) and confirm by pressing the left encoder (ENTER). Dim level, hue and
color saturation (SAT) can now be configured using the three push button rotary encoders (see illustration).
currently activated mode
Rotate encoder =
set DIM
Press encoder =
select mode
STAND-ALONE MODE DIRECT LED (RGBW color mix)
Starting from the main display, press on the left push button rotary encoder to move to the mode selection menu. Rotate the left encoder
(SELECT) to select "Direct LED" mode (as indicated by selector arrow on left) and confirm by pressing the left encoder (ENTER). The total
brightness and intensity levels for R, G, B and W can now be configured using the three push button rotary encoders (see illustration).
currently activated mode
Rotate encoder =
set overall brightness level (DIM)
Press encoder =
select mode
8
Rotate encoder =
set Hue
Rotate encoder
Set R and B dim levels
Press encoder =
switch between R+G and B+W (Color)
Fan mode
Rotate encoder =
set color saturation (SAT)
Press encoder =
Open main menu
Fan mode
Rotate encoder
Set G and W dim levels
Press encoder =
Open main menu