Set Display Screen, Menu Display; Hide Not Used Channels/Groups, Menu Display Mode - Selve commeo Multi Send Betriebsanleitung

Programming
8.6.5. Set display screen, menu Display
In the menu Display you can switch the backlight of the display on and off and can set
the duration. The set time can be adjusted between 5 and 30 seconds in 5 second
steps.
For a longer battery service life the commeo Multi Send will be switched into an energy
saving mode. The time for the switch off can be set between 1 minute and 5 minutes
in one minute steps.
N ote: A longer lighting duration and a delayed switch off into the energy saving mode
will shorten the battery service life.
The menu Display is selected.
With the buttons  and  you will select the setting.
With the button  and  you will switch the function on and
off or will be able to enter the modification.
With the button
ment without saving the modifications.
With the button
get back into the menu Adjustment.
8.6.6. Hide not used channels/groups, menu Display mode
In the menu Display mode you can hide not used channels and groups in the operat-
ing mode for easier operation so that the channels will not be shown at the channel/
group selection. In the menus the channels and groups will furthermore be shown.
The menu Display mode is selected.
With the button  you will switch off the mode (
nels and groups are shown.
With the button  you will switch on the mode (
used channels and groups are shown.
With the button
ment without saving the modifications.
With the button
get back into the menu Adjustment.
you will get back into the menu Adjust-
you can save the modifications and will
you will get back into the menu Adjust-
you can save the modifications and will
55
). All chan-
). Only the
GB
GB