Shift Channels/Groups Into Touch Control, Menu Touch Control - Selve commeo Multi Send Betriebsanleitung

Programming
8.4.4. Shift channels/groups into touch control, menu Touch control
In the menu Touch control single channels or groups can be shifted into touch control
in order to set the turn of a venetian blind easily. In the display, the touch control mode
will be shown with the venetian blind symbol in the operating mode. In the touch con-
trol mode the drive will start moving with a time-delay of 0.5 seconds. When releasing
the moving button within the first second of the move, the drive will stop immediately.
When the drive is moved longer than 1 second, the drive will go into self-retaining.
The menu Target position Touch control is selected.
With the buttons  and  you will select the channel or group.
With the button  you will switch off the touch control mode
( ).
With the button  you will switch on the touch control mode
( ).
With the button
istration without saving.
With the button
into the menu Administration.
you will get back into the menu Admin-
you can save the settings and get back
51
GB
GB