Assign Channels To A Group, Menu Assignment Channel/Group - Selve commeo Multi Send Betriebsanleitung

GB Programming
8.4.3. Assign channels to a group, menu Assignment channel/group
In the menu Assignment channel/group you can assign channels which you want to
have in the group to the group 1 to 9. Factory set, the channels 1 to 10 are assigned to
group 1 and the channels 11 to 20 are assigned to group 2. This assignment can be
changed from you.
In the channel selection these pictograms have the following meaning:
Channel is not used and can not be selected.
Channel is used and is not assigned to the group.
C hannel is used and assigned to the group.
The menu Assignment channel/group is selected. In this
example it is group 3.
With the buttons  and  you can select the group of which
you want to assign channels or which you want to change.
With the button
istration without saving.
With the button
you can select channels for the group.
The channel selection for the selected group will be shown.
With the buttons , ,  and  you will select the channel
which you want to assign to the group or which you want to
delete. By pushing the button the channel will be assigned
or deleted.
With the button
ment channel/group without saving.
With the button
and will get back into the menu Assignment channel/group.
you will get back into the menu Admin-
or you will get into the menu in which
you will get back into the menu Assign-
you will save the channel assignment
50