Explanation Of Functions; Status Led; Moving Button Up , Stop , Down; Channel And Group Option Key - Selve commeo Multi Send Betriebsanleitung

GB Explanation of functions
7. Explanation of functions
7.1. Status LED
A radio signal is indicated by the status LED lighting up green. In case of message, the
LED will switch from green to red after a short time. If no receiver has been taught in
on the channel yet, the LED will light up orange.
7.2. Moving button UP , STOP , DOWN 
By using the moving buttons, the respective receiver of the selected channel/group can
be moved in the operating mode. At an awning UP  is the retraction and DOWN 
the extending of the awning. When the commeo Multi Send is currently in a menu
option, the selection can be made by these buttons.
7.3. Channel and group option key
With the channel and group option key you can select the 20 channels, 9 groups and
the central group. The central command automatically contains all taught-in receivers.

7.4. AUTO/MAN-shift

In the position automatic and manual moving commands of the commeo Multi
Send are transmitted. In the position only manual moving commands of the
commeo Multi Send will be transmitted (e.g. UP, STOP, DOWN by key stroke).
7.5. Call up menu
With the display button on the left you can call up the main menu. The settings are
explained in the chapter 8. Additionally it is possible to let show the current values when
using a sensor.
42