Setup Location - VOLTCRAFT 1893032 Bedienungsanleitung

• Maintenance, modifications and repairs must only be
carried out by a technician or a specialist repair centre.
• If you have any questions which are not answered
in these operating instructions, contact our technical
support service or other technical personnel.
b) Setup location
• The product may only be used in dry, enclosed spaces.
It must not become damp or wet, otherwise the power
adapter may cause a fatal electric shock!
• Place the charger on a clean, level surface of a sufficient
size.
• Do not place the charger on flammable materials (e.g.
a carpet or tablecloth). Always use a non-flammable,
heatproof surface. Keep the charger away from
flammable or combustible materials (e.g. curtains).
• Make sure that the cable to the wall plug is not pinched
or damaged by sharp edges. Place the cable between
the wall plug and the charger in such a way that nobody
can trip over it.
• Do not place any containers filled with liquid (e.g. vases
or plants) on or next to the charger. Liquids that come
into contact with the interior components may destroy the
charger and cause a fire or explosion.
• If liquids get inside the charger, immediately disconnect
the charger from the power supply and remove any
inserted batteries. Discontinue use and take the charger
to a specialist repair centre.
• If any liquids get into the mains adapter, switch off the
mains socket to which the mains adapter is connected.
To do this, turn off the corresponding circuit breaker
or unscrew the fuse. In addition, turn off the residual
current device in order to disconnect all poles of the
socket from the mains voltage. You can then unplug the
mains adapter from the mains socket. Discontinue use
immediately and take the mains adapter to a specialist
repair shop, or dispose of it in an environmentally friendly
manner.
26