Troubleshooting; Technical Specifications - SOLIS FB-616C Typ 8453 Bedienungsanleitung

TROUBLESHOOTING

▲ ▲
Problem Solution
The appliance – Was the power plug connected to a working power
does not function. outlet?
– Was the lever press arm pushed down?
– Were juicing cone and squeezing cone correctly
mounted to the appliance?
GB
– Were pulp filter and juice collector correctly installed?
– The motor overload protection has been triggered.
(See below for details)
Motor overload – To protect the motor, your Solis Citrus Juicer is fitted
protection has been with overload protection. Should the juicer suddenly
triggered. stop after prolonged use or when processing fruits
that are hard to juice, pull the plug and let the appli-
ance cool down for 15 minutes. Once the appliance
has cooled down, you can start using it again.
– Note: To allow the motor overload protection to reset,
it is critical that the power plug is pulled! Wait for
5–10 minutes before reconnecting the appliance to
the power and starting it up again.
– In spite of the newly fitted motor overload protec-
tion, we recommend not juicing too many fruits in
one go but instead always processing them in smaller
amounts. Always take a 10 minute break after having
the appliance in use for 5–6 minutes!
72
T E CH NI C AL SPE C I FI C A TI ONS
▲ ▲
Model-No. FB-616C, Type 8453
Product description Citrus Juicer
Voltage / frequency 220 –240 V~ / 50 / 60 Hz
Output
160 Watts
Dimensions (Ø x H) approx. 18  28 cm
Weight approx. 2,36 kg
Technical changes reserved.
GB
73