Hilti TE 30 Original Bedienungsanleitung Seite 27

Trouble or fault
The drill bit does not rotate.
The drill bit cannot be re-
leased.
The drill bit makes no
progress.
9 Disposal
Most of the materials from which Hilti tools and appliances are manufactured can be recycled. The
materials must be correctly separated before they can be recycled. In many countries, your old tools,
machines or appliances can be returned to Hilti for recycling. Ask Hilti Service or your Hilti representative
for further information.
▶ Disposal of electric tools or appliances together with household waste is not permissible.
10 RoHS (Restriction of Hazardous Substances)
Click on the links to go to the table of hazardous substances: qr.hilti.com/r4236 (TE 30), qr.hilti.com/r1833752
(TE 30-AVR), qr.hilti.com/r4235 (TE 30-C-AVR) and qr.hilti.com/r4253 (TE 30-M-AVR).
There is a link to the RoHS table, in the form of a QR code, at the end of this document.
11 Manufacturer's warranty
▶ Please contact your local Hilti representative if you have questions about the warranty conditions.
Printed: 08.11.2017 | Doc-Nr: PUB / 5070837 / 000 / 05
Possible cause
The function selector switch is not
engaged or is in the "Chiseling"
or "Chisel adjustment" position.
The chuck is not pulled back fully.
The tool has been set to reverse
rotation.
Action to be taken
▶ Set the function selector switch
to "Drilling without hammering"
or "Hammer drilling"
▶ Pull the chuck back as far
as it will go and remove the
accessory tool.
▶ Set the tool to forward rotation.
English
.
21