Hilti TE 30 Original Bedienungsanleitung Seite 23

Weight in accordance with EPTA procedure 01
Ø hammer drill bits
Ø drill bits for wood
Ø drill bits for metal
Ø mixing paddle with smooth shank (for mixing non-
flammable substances)
4.1 Noise information and vibration values in accordance with EN 60745
The sound pressure and vibration values given in these instructions were measured in accordance with a
standardized test and can be used to compare one power tool with another. They can also be used for a
preliminary assessment of exposure. The data given represents the main applications of the power tool.
However, if the power tool is used for different applications, with different accessory tools, or is poorly
maintained, the data can vary. This can significantly increase exposure over the total working period. An
accurate estimation of exposure should also take into account the times when the tool is switched off, or
when it is running but not actually being used for a job. This can significantly reduce exposure over the
total working period. Identify additional safety measures to protect the operator from the effects of noise
and/or vibration, for example: Maintaining the power tool and accessory tools, keeping the hands warm,
organization of work patterns.
Noise emission values
Sound (power) level (L
Uncertainty for the sound power level (K
Sound pressure level (L
Uncertainty for the sound pressure level (K
Sound (power) level (L
Uncertainty for the sound power level (K
Sound pressure level (L
Uncertainty for the sound pressure level (K
Total vibration
Hammer drilling in concrete (a
Chiseling (a )
h, Cheq
Uncertainty (K)
Hammer drilling in concrete (a
Chiseling (a )
h, Cheq
Uncertainty (K)
5 Operation
5.1 Preparations at the workplace
CAUTION
Risk of injury! Inadvertent starting of the product.
▶ Unplug the supply cord before making adjustments to the power tool or before changing
accessories.
Observe the safety instructions and warnings in this documentation and on the product.
Printed: 08.11.2017 | Doc-Nr: PUB / 5070837 / 000 / 05
)
WA
)
WA
)
pA
)
pA
)
WA
)
WA
)
pA
)
pA
)
h, HD
)
h, HD
TE 30­C­AVR TE 30­M­AVR
4.2 kg 4.4 kg
5 mm ...28 mm 5 mm ...28 mm
5 mm ...20 mm 5 mm ...20 mm
3 mm ...13 mm 3 mm ...13 mm
•/• 80 mm ...150 mm
TE 30 TE 30­AVR
101 dB(A) 101 dB(A)
3 dB(A) 3 dB(A)
90 dB(A) 90 dB(A)
3 dB(A) 3 dB(A)
TE 30­C­AVR TE 30­M­AVR
101 dB(A) 101 dB(A)
3 dB(A) 3 dB(A)
90 dB(A) 90 dB(A)
3 dB(A) 3 dB(A)
TE 30 TE 30­AVR
16.5 m/s² 12 m/s²
•/• •/•
1.5 m/s² 1.5 m/s²
TE 30­C­AVR TE 30­M­AVR
12 m/s² 12 m/s²
11 m/s² 11 m/s²
1.5 m/s² 1.5 m/s²
English 17