_M35L.book Seite 27 Montag, 8. Dezember 2008 2:57 14
PerfectView M35L
7.3
Setting the monitor
Set the monitor as follows:
➤
If you would like to mirror the image use the
–
the "Right/Left" switch (fig. 7 2, page 5) to mirror the image around the vertical
axis (the picture appears as it would if you were looking in the rear view mirror).
➤
If you wish to set the PAL or NTSC television standard, push the "PAL/NTSC" slid-
ing switch (fig. 7 3, page 5) to the desired standard.
➤
If you wish to set the brightness, set the "Brightness" setting wheel
(fig. 7 4, page 5) to the desired brightness.
8
Cleaning and maintaining the LCD monitor
Caution!
a
Do not use sharp or hard objects for cleaning as these may damage the monitor.
Warning!
e
Remove the cable before cleaning the monitor to prevent short circuiting.
➤
Clean the monitor with a soft, damp cloth from time to time.
9
Guarantee
The statutory warranty period applies. If the product is defective, please contact the man-
ufacturer's branch in your country (see the back of the instruction manual for the address-
es) or your retailer.
For repair and guarantee processing, please include the following documents when you
send in the device:
A copy of the receipt with purchasing date
A reason for the claim or description of the fault
10
Disposal
➤
Place the packaging material in the appropriate recycling waste bins wherever
possible.
If you wish to finally dispose of the device, ask your local recycling centre or
M
specialist dealer for details about how to do this in accordance with the applica-
ble disposal regulations.
Cleaning and maintaining the LCD monitor
27