Technical Description; Functional Description; Control Elements - Waeco PerfectView M35L Montage- Und Bedienungsanleitung

_M35L.book Seite 23 Montag, 8. Dezember 2008 2:57 14
PerfectView M35L
5

Technical description

5.1

Functional description

The RV-35 LCD monitor is a 3.5" monitor which can be connected to a camera (e. g. a
rear view video camera) or another video source (e. g. a TV).
The LCD monitor is equipped with:
A non-reflective screen surface
A function which enables you to mirror the image around the vertical or horizontal
axis
– Mirroring the image vertically: the picture appears as you would see it in the rear
view mirror
A function to switch between the following television standards:
– PAL
– NTSC
The LCD monitor can display both the PAL and NTSC video formats. It can be attached
to the dashboard or the windscreen and is therefore suitable for connecting to a rear view
video system which allows the driver to see the space behind the vehicle, for example,
when parking.
5.2

Control elements

The following control elements are located on the monitor:
No. in
fig. 7, Designation
page 5
1 Down/Up
2 Right/Left
3 PAL/NTSC
4 Brightness
5 Power On/Off
Description
No function assigned.
Mirrors the image around the vertical axis.
The image appears as if you were looking into
the rear view mirror.
Switches the TV system from PAL to NTSC and
vice versa.
Adjusts the brightness.
Switches the monitor on and off.
Technical description
23