Safety And Installation Instructions - Waeco PerfectView M35L Montage- Und Bedienungsanleitung

_M35L.book Seite 20 Montag, 8. Dezember 2008 2:57 14

Safety and installation instructions

2 Safety and installation instructions
Please observe the prescribed safety instructions and stipulations from the vehicle
manufacturer and service workshops!
The manufacturer will not be held liable for claims for damage resulting from the following:
Faulty assembly or connection
Damage to the appliance resulting from mechanical influences and excess voltage
Alterations to the device without express permission from the manufacturer
Use for purposes other than those described in the operating manual
Warning!
e
To prevent short circuits, always disconnect the negative terminal of the electri-
cal system before working on the vehicle.
If the vehicle has an additional battery, its negative terminal should also be dis-
connected.
Warning!
e
Insufficient supply line connections could result in short circuits which
– Cause cable fires
– Trigger the airbags
– Damage electronic control devices
– Cause electric functions to fail (indicators, brake light, horn, ignition, light).
Please observe the following instructions:
When working on the following lines, only use insulated cable lugs, plugs and tab
sleeves:
– 30 (direct supply from positive battery terminal)
– 15 (connected positive terminal, behind the battery)
– 31 (return line from the battery, earth)
– 58 (reversing light)
Do not use porcelain wire connectors.
Use a crimping tool (fig. 1 11, page 3) to connect the cables.
When connecting to supply line 31 (earth), screw the cable
– To the vehicle's earth bolt with a cable lug and a gear disc or
– To the sheet metal body work with a cable lug and a self-tapping screw.
Ensure that there is a good earth connection.
20
PerfectView M35L