Herunterladen Diese Seite drucken

How To Use - Klarstein 10006871 Bedienungsanleitung

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

1. Place the heating base on the firm and level surface.
2. Press the cover button to open the cover, Pour the desired amount of clean water into the kettle
(But need to reach the Min 0.5L).Don't touch any part of the kettle except the handle when the
appliance is in use, and ensure that the lid is properly closed. The amount of water can be measured
by the level mark on the outside of the kettle.Always pay attention to the minium and maximum
levels and ensure that the lid is properly and firmly closed.
3. Position the kettle in such a way on the base that the underside of the kettle fits recisely into the
contact unit on the base.
4. Insert the plug into a wall socket.
5. Put the switch up to start the heating process. The indicator lamp will light up.
6. As soon as the water reaches boiling point, the switch is turned automatically to down position. The
indicator lamp will go out. The water kettle can also be switched off manually by putting the switch
to the down position.
7. The hot water may now be poured safely through the pout into another container.
1. Regularly clean the mineral deposits within kettle to prolong life of product.
2. Cut off the power before cleaning.
3. Do not immerse the base of kettle in any liquid.
4. Put the mixture of the vinegar and water under proportion of 1:2, and then connect to the power,
keeping kettle working and wait till it cuts off automatically.
5. Maintain the mixture in kettle for 24hours then pour out, putting clean water to certain level, start
working again.
6. Pour out the mixture and clean kettle with clean water, repeat procedures if needed.
7. Faults if any during use remove the kettle from base and pour the water out, make sure faults
detection or cleaning should be taken after cooling down.
Electric Kettle
Capacity:1,7 L
Lid with water filter
Glass body
360° rotational power base
Safety boil-dry cut off
Over heating protector
Concealed heating element
LED lamp
Voltage: 220 ~ 240V/50Hz
Power: 1850W ~ 2200W

HOW TO USE

CARE AND CLEAN
CHARACTERISTICS

Werbung

loading