Use And Operation - Klarstein 10029297 Anleitung

Before first Use
1. Before first use fill the kettle with clean water to maximum capacity and boil. Discard the water and repeat
the process. The kettle should always be unplugged when filling or adding water.
2. Fill the kettle with water to desired level. Do not overfill or there will be a risk of spillage or spitting. The water
level indicator will assist you to measure the correct amount. You can fill the kettle via the spout or after
opening the lid. Do not forget to close the lid after filling otherwise the kettle will not automatically switch
off after use.
3. Do not fill with less than 0.5 liters of water to "min" indication to prevent the kettle running dry while ope-
rating Do not fill with less than 1.7 liters of water to "max" indication.
4. An automatic safety cut-out has been fitted for protection against overheating it will operate if the kettle is
switched on when containing insufficient water Always ensure the water inside the kettle covers the mini-
mum mark on the water level indicator gauge. If the automatic safety cut-out has operated switch the kettle
off, disconnect from the power outlet and allow the kettle to cool down for 5 to 10 minutes. Then refill with
and switch on the kettle will work as normal
5. After boiling, the kettle switches off automatically.
6. Disconnect the kettle from the mains electricity supply.
7. Do not open the lid when pouring. If the kettle is overfilled, boiling water may be ejected. The kettle is only
to be used with the stand provided.
8. This appliance is intended to be used in household and similar applications such as: staff kitchen areas in
shops, offices and other working environments; farm houses; by clients in hotels, motels and other residen-
tial type environments; bed and breakfast type environments.
Basic Operation
1. Put the base on the dry, smooth and horizontal plane, insert the plug to the socket. When the kettle is inser-
ted into the base, the power puts through automatically.
2. Press the , key shortly, with the sound "Di. " , it starts running
3. After the water boils, indicator turns off and the buzzer sends out a group "di-di-di" sounds at the same time.
Advanced Operation
1. Press for 3 seconds, with the buzzer sends out "di" sound, it starts running the function of heat insula-
tion. The LED light will be shinning with red light, while after the water boils, the kettle will keep the water
temperature for 2 hours with the indicator light shining. During the 2 hours heat insulation function running,
it will go on heating when the temperature arrives at 85 °C.
2. Press once, we can see the indicator light of 60 °C shines, with the green LED light. It means that it will
stop heating when the water temperature is 60 °C.
3. Press twice, we can see the indicator light of 70 °C shines, with the blue LED light. It means that it will
stop heating when the water temperature is 70 °C.
4. Press 3 times, we can see the indicator light of 80 °C shines, with the yellow LED light. It means that it
will stop heating when the water temperature is 80 °C.
5. Press 4 times, we can see the indicator light of 90 °C shines, with the purple LED light. It means that it
will stop heating when the water temperature is 90 °C.
6. After the use finished please put plug off the power socket

Use and Operation

6