Product Description; Before First Use; Use And Operation - Klarstein 10029177 Bedienungsanleitung

• Remove the kettle from its power base before fi lling or pouring.
• Do not place the kettle, power base or mains lead on or near any hot surface, hotplate, hot hob
or burner.
• Do not use the kettle for any purpose other than heating water.
• Use the kettle only with power base supplied (and vice versa)
• Do not operate any appliance with a damaged cord or plug, or after the appliance malfunctions. Or
has been damaged in an manner. If the mains lead is damaged, it must be replaced be a special
lead available from the Service department
• Ensure that the lid is closed before switch
1 Spout
2 Lid
3 Push Button of Lid
4 Handle
5 ON/OFF Switch
6 Water level Indicator
7 Cordless Power Base
8 Power Indicator
9 Power Cord
Remove all packaging from the kettle and its power base. Before using the kettle for the fi rst´time,or
if it has been out of use for a long time, fi ll to the max mark and boil, then discard the boiled water
and rinse the kettle out with cold water.
Position the power base as close to a wall socket as possible. Route the mains lead so that it dose not
overhang the work surface,and cannot be caught accidentally.Shorten the mains lead by winding it
round the cord storage area under the power base,and bring it out of the cord exit cut into the base.
Opening the lid
• Remove the kettle from the power base (9).
• If the switch (7) has been pushed down inadvertently, it will spring up, into the <OFF> position.
CAUTION
Risk of burns! If the kettle has just boiled, it will be full of steam,which will escape as soon
as the lid is opened. Hold the handle fi rmly in one hand, grip the lid knob in the other, and
pull the lid straight up. As soon as it separates from the kettle, move it out of the steam.
7

Product Description

Before fi rst Use

Use and Operation