Operation - Klarstein Hot Spot Crystal IR Handbuch

EN
24
1. Tighten the nut with a 12-mm spanner.
2. Adjust the wall contact by turning the spacers on or off. The spacers of the lower
fastening must lie securely against the wall.
3. Connect the mains plug to a suitable socket.
The installation is finished!

OPERATION

Control panel
1 Childlock indicator
2 Low heating level indicator
3 High heating level" indicator
4 Current day of the week
5 Main display
6 Active weekdays
7 Mode display( P, W or S mode)
8 Hour display
9 Displaying: inactive hours
10 Displaying: active hours"
1 1 Operating buttons