Maintenance And Care; Notes Regarding Environmental Protection; Contact Information - Eufab 16468 Bedienungsanleitung

6. OPERATING INSTRUCTIONS
6.1 OVERVIEW
1 Charging socket
2 Charge control lamp
3 Charging zone
4 Non-slip strips
5 Non-slip foot
6 USB connector
7 Micro-USB B connector
6.2 USE
First remove the protective film from the non-slip feet (Position 5 in the overview). Place the
induction charging station on an even surface, if possible. Plug the Micro-USB B connector
(Position 7 in the overview) of the charging cable into the socket of the induction charging
station (Position 1 in the overview).
Connect the USB connector (Position 6 in the overview) of the charging cable to a USB port of
your computer or with a USB charger. The induction charging station is now ready for use, this
can be seen by the lit red charge control lamp (Position 2 in the overview).
To charge, place your smartphone on the charging zone (Position 3 in the overview) of the
induction charging station. The charging process starts automatically, the charging control
lamp is now lit up in blue.

7. MAINTENANCE AND CARE

The induction charging station is maintenance-free if used according to its intended purpose.
Clean the induction charging station with a soft, dry cloth only. Do not use cleaning agents.
Never allow liquids to get into the housing.

8. NOTES REGARDING ENVIRONMENTAL PROTECTION

Do not dispose of electrical devices with household waste! Electrical and elect-
ronic scrap must be collected separately and disposed of in an environmentally
responsible manner for recycling. Please contact your community or city admi-
nistration regarding disposal options for electrical and electronic scrap.

9. CONTACT INFORMATION

EAL GmbH
Otto-Hausmann-Ring 107
42115 Wuppertal, Germany
+49 (0)202 42 92 83 0
+49 (0) 202 42 92 83 – 160
Figure 1: Overview
info@eal-vertrieb.com
www.eal-vertrieb.com
7