Filter Maintenance - clage Zip HydroTap G4 B 160 Gebrauchsanleitung

LCD Screen operation - Section F
Dispense Times
The ability to change the maximum dispensing time for the hot
water has been introduced. The default settings for the maximum
dispensing times is 15 seconds. Here, the operator may change both
the hot and cold dispensing times to between 5 and 15 seconds, in
increments of 1 second. To edit the dispensing times:
1. Press the [MENU] button for main menu.
2. Press the [Setting] button.
3. Press the [Dispense Time] button.
4. Select the option to change and scroll using the up and down
arrow Keys
Water Filter
The Zip HydroTap notifies when filter replacement is due. If you
notice one of the following, you will need to change the filter.
> The Change Filter light will flash white once a second and remain
so until reset. A filter status light is located below the Chilled
Blue Lights on the tap head assembly.
> The filter percentage will show 0 % on the Home screen.
Note: Depending on local water quality conditions and usage, the
filter may require changing anywhere from 1000 Ltrs to 10000 Ltrs.
You may also need to replace the filter if you notice unpleasant
odours or tastes.
Some water may drip from the filter head (socket) during replace-
ment. Keep a towel handy to dry up any drips.

Filter Maintenance

34