clage Zip HydroTap G4 B 160 Gebrauchsanleitung Seite 27

LCD Screen operation - Section C
IV. - Booster
This function should only be considered when a Booster unit is
installed.
Note: Failing to make the correct selection for 'Booster' will eff ect
product performance.
V. - Lux Sensor Calibration
LCD Screen operation - Section D
D Service
Caution must be observed when changing any settings wit-
hin the Service Menu as any changes may aff ect the normal
operation of the unit. This can only be done by a technician.
Please contact the Clage customer service for further assistance.
1. Press the [MENU] button for
main menu.
2. Press the [Install] button.
3. Press the [Booster] button.
4. In the next screen, press but-
A
ton to enable the Booster.
5. Dispense boiling water for
30 secs and check the outlet
hose from the Booster is warm.
1. Press the [MENU] button for
main menu.
2. Press the [Install] button.
3. Press the [Lux Sensor Calibra-
tion] button.
4. The lights on the Tap head will
fl ash to confi rm calibration.
1. Press the [MENU] button for
main menu.
2. Press the [Service] button.
3. A password is required to enter
service menu.
27