clage Zip HydroTap G4 B 160 Gebrauchsanleitung Seite 21

Tap LED's
Red Boiling Water LED
Red LED
On all the time
This indicates that the boiling water is
ready.
Flashing slowly
This indicates that the boiling water is
below the desired temperature.
Wait for the light to stop flashing before
dispensing water. The flashing light will
typically occur after switching on, or
coming out of sleep mode.
White Filter LED
White filter LED
White filter LED off
This indicates the filter is operating
within its normal specified lifespan.
White filter LED flashing slowly
The light will flash slowly when the
filter is due for replacement and the
LCD will show "Filter Change". Refer
to "Replacing the filter" in section
'C' of this document.
21