Herunterladen Inhalt Inhalt Diese Seite drucken

About The Discs - Silvercrest SBMS 30 A1 Bedienungs- Und Sicherheitshinweise

Bluetooth-kompakt-stereoanlage
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1
Do not move the product during
playback
During playback, the disc rotates at high
 
speed .
Do not lift or move the product during
 
playback, as doing so may damage the disc
or the product .
When moving this product
When changing places of installation or
 
packing the product for moving, be sure to
remove the disc in the player . Then, press
I / O
to turn the power off . Only then
18
disconnect the power cord
product with the disc loaded may result in
damage to this product .
This product includes this label:
CLASS 1 LASER PRODUCT
LASER KLASSE 1
APPAREIL À LASER
DE CLASSE 1
Invisible laser radiation when open and interlocks
defeated . Avoid exposure to beam of laser .
WARNING! Laser Radiation! The
CD drive in this product is classified as
a "Class 1 Laser Product" . Never open
the product and do not try to repair the
product yourself . Inside the housing there
are invisible laser rays . Do not expose
yourself to the laser rays . There is a
danger of injury .
˜ About the discs
Handling
 
 
 
 
Storage
 
 
. Moving this
46
 
Cleaning
 
 
m
 
 
Do not touch the playback side of discs .
Hold discs by the edges to avoid leaving
fingerprints on the surface .
Any dust, fingerprints or scratches may
cause a malfunction .
Never attach a label or sticky tape to the
disc .
Put discs back in their case after playing
them .
Never expose disc to direct sunlight or heat
sources .
Never leave discs inside a car parked in full
sunlight .
Use a clean soft lint-free cloth to clean the
discs, working from the centre outwards in a
straight line .
Do not use solvents such as petrol, thinners,
commercially available cleaners or antistatic
sprays for vinyl records .
WARNING! Note on the mains
disconnection
Once you press
/
6
STANDBY mode, the product still consumes
electricity in STANDBY mode .
Disconnecting the product completely
involves removing the power plug from
the mains socket . The product should be
positioned in such a way that ensures direct
and unobstructed access to the mains socket
so that the power plug can be immediately
pulled out in an emergency situation . To
avoid the risk of fire, if the product is not
going to be used for an extended period
(e .g . during holidays), it should always be
disconnected from the mains socket . If there
is the risk of a thunderstorm or lightning,
disconnect the product from the power
supply .
to turn it to
20
GB/IE
25

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis