IKEA Renlig Handbuch Seite 23

ENGLISH
Problem
The appliance
does not fill the
water:
The appliance
does not drain
the water:
Possible cause
The water tap is closed.
(The red indicator of button
flashes).
The water tap is blocked or there
is lime scale.
The connection of the water inlet
hose in not correct.
The water pressure is too low.
The inlet hose is squashed or
kinked.
(The red indicator of button
flashes).
The filter in the inlet hose or the in-
let valve filter are blocked.
(The red indicator of button
flashes).
The door is not properly closed.
(The red indicator of button
flashes).
The drain hose is squashed or
kinked.
(The red indicator of button
flashes).
The drain filter is clogged.
(The red indicator of button
flashes).
An option or a programme that
ends with the water still in the tub
or a that eliminates all the spin-
ning phases has been selected.
The connection of the drain hose is
not correct.
Solution
Open the water tap.
Clean the water tap.
Check the inlet hose connection.
Contact your local water authori-
ty.
Check the inlet hose connection.
Clean the water inlet filters. (See
"Cleaning the inlet hose and the
valve filter" for more details).
Close the door firmly.
Check the drain hose connection.
Clean the drain filter.
Select the draining or spinning
programme.
Check the drain hose connection.
23