IKEA Renlig Handbuch Seite 20

ENGLISH
Cleaning the drain filter
Proceed as follows:
A B
1
2
Place a container
close to the pump (A),
to collect any
spillage.
Pull out the
emergency emptying
hose (B), place it in
the container and
remove its cover cap.
When no more water
comes out, unscrew
the filter cover and
remove it. Always
keep a rag nearby to
dry up spillage of
water when removing
the filter.
Remove any objects
from the filter impeller
by rotating it.
2
1
Cleaning the inlet filter and the filter valve
If the appliance takes long to fill with water
or doesn't fill, the starting button indicator
flashes in red. Check if the water inlet filter
and the valve filter are blocked (see
chapter "Troubleshooting" for more details).
Proceed as follows:
20
Use a pencil to check
whether the filter
wheel right at the
back of the filter
housing can turn. (It is
normal for the filter
wheel to turn jerkily.)
If the filter wheel
cannot be turned,
please contact the
Authorised Service
Centre.
Put the cap back on
the emergency
emptying hose and
place the latter back
in its seat. Screw the
filter fully in.
• Turn off the water
tap.
• Unscrew the hose
from the tap.
• Clean the filter in
the hose with a stiff
brush.
• Screw firmly the
inlet hose back
onto the tap.