Klarstein 10032903 Bedienungsanleitung Seite 28

EN
Cleaning grease mesh filters
The grease filters can be cleaned by hand. Soak them for about 3 minutes in a lye of
water and a grease-loosening detergent and then brush them off carefully with a soft
brush. Do not apply too much pressure to avoid damaging it. (Allow the filters to dry
naturally, avoiding direct sunlight).
Always wash the filters separately from dishes and kitchen utensils. It is recommended
not to use a rinse aid. Remove the filters as shown in the picture below.
Installing grease mesh filters
To install the filters, follow the 4 steps described below:
• Insert the filter into the slots on the back of the hood.
• Push the button on handle of the filter.
• Release the handle when the filter is in a rest position.
• Repeat these steps to install all filters.
28