Use And Operation - Klarstein Powericer ECO 3 Bedienungsanleitung

EN
18
Control Panel (both items)
START Press to turn unit on.
STOP Press to turn unit off.
SELECT Ice size selection (S) Small or (L) Large. ) The default setting is Large.
If this comes on press STOP, add water and press START to restart
ADD WATER
the Ice maker.
If this light comes on the ice has reached the maximum capacity of
ICEFULL
the storage cabinet.

USE AND OPERATION

Before first Use
• During transportation, the incline angle of the cabinet should not be over 45°. Do
not turn the Ice maker upside down,as this may damage the compressor and sealed
system.
• Remove all packing material and carefully check your ice maker to ensure it is in
good condition and that there is no damage to the ice maker or power cord and
plug.
• The ice maker should be placed horizontally on a level surface.To ensure proper
ventilation for your ice ma- ker allow 150 mm of space at the top, the back and
on each side. Do not install the Ice maker near an oven, radiator, or any other
heat source. Before using the Ice maker for the first time, please wait 2 hours after
positioning it, and keep the front lid open for at least 2 hours
• Ensure that the voltage indicated on the ice maker corresponds with the voltage in
your home.
• Pure water is not allowed to be used on this unit, spring water is recommended.