Processing Left-Over Dough; Program List - Silvercrest IAN 313492 Bedienungs- Und Sicherheitshinweise

when it has finished pressing out pasta. The total
process is dependent on the program selected
and takes about 8 to 12 minutes (see figure L).
You can use the included dough scraper
a sharp knife to cut pastas.

Processing left-over dough

If there is left-over dough in the mixing chamber
when the automatic pasta making process
1
has finished, first switch the device off.
Open the lid and, with your fingers, push
4
the dough towards the opening of the pressing
tube inside the mixing chamber
8
Close the lid again.
4
Turn the product on and push the pressing out
button to press out the remaining dough.
2e
This function takes 5 minutes.
This process can be repeated multiple times.
With sticky doughs and semolina dough, it is
particularly likely that there will be dough left in
the mixing chamber
ATTENTION! Only use this function when
water and flour have been well mixed. It could
otherwise lead to malfunctions which would
have a negative impact on the device's lifespan.
Tips
- Before they are added to the mixing chamber
, liquids must first be mixed together and
1
whisked in the measuring cup for liquids
- Do not add any non-liquid ingredients except
flour during processing (eggs must be mixed
with water before use).
- Only pour vegetable juice and the egg / water
mixture through the opening in the left of the lid
and never directly into the mixing chamber
4
- Do not pour the egg mixture directly onto the
flour.
- Add eggs or juice to make pasta with different
aromas.
- Dust the pastas with a little flour when they
have come out. This gives them more bite and
stops them from sticking together so easily.
14
.
1
.
1
11

Program list

Automatic function „1 cup flour"
or In standby-mode, press the automatic button
„1 cup flour" to select to make pasta using
2d
one cup of flour. The buzzer will sound and a
digital countdown from „11:00" minutes of
processing time will show in the LC display
The device will knead anticlockwise for 3 minutes
then pause for 5 seconds. After this, the auto-
matic pressing out function starts. At the end of
the processing time, „OFF" will appear on the
display . If all of the dough has already been
2a
pressed out before the end of the 11 minutes,
the device can be switched off. If there is still
dough left in the mixing chamber after the
11 minutes have passed, follow the instructions
in the chapter „Processing left-over dough".
Automatic function „2 cups flour"
In standby-mode, press the automatic button
„2 cups flour" to select to make pasta using
2d
two cups of flour. The buzzer will sound and a
digital countdown from „12:00" minutes of
processing time will show in the LC display
The device will knead anticlockwise for 3 minutes
then pause for 5 seconds. After this, the auto-
matic pressing out function starts. At the end of
the processing time, „OFF" will appear on the
LC display. If all of the dough has already been
pressed out before the end of the 12 minutes,
. the device can be switched off. If there is still
dough left in the mixing chamber after the
12 minutes have passed, follow the instructions
in the chapter „Processing left-over dough".
Knead function
In standby mode, press the knead button
1
select the knead function. The buzzer will sound
and a digital countdown from „3:00" minutes
of processing time will show in the LC display
The dough will be kneaded anticlockwise for
3 minutes, then the process will end and „OFF"
will appear in the display.
.
2a
.
2a
to
2c
:
2a
GB/IE 27