Cutting Equipment; Safety Instructions For Maintenance - Husqvarna 553RBX Bedienungsanleitung

WARNING: Make sure that the product is
attached safely to the harness when you
operate the product. If not, you can not
control the product safely and result in injury
to you or others.
The quick release function is at the front of the harness.
The harness straps must always stay at the correct
position.
In an emergency, the quick release function helps you to
safely release from the product.
Cutting attachment
WARNING: The cutting attachment must not
rotate when you do work on it. Make sure
that the engine has stopped. Remove the
spark plug cap before you do work on the
cutting attachment.
WARNING: Make sure that the cutting
attachment is not damaged. A damaged
cutting attachment can cause accidents.
Replace a damaged cutting attachment.
WARNING: Use the correct cutting
attachment. Only use the cutting attachment
with the guards we recommend, refer to
Accessories on page 27 .

Cutting equipment

• Use the blades and grass knives to cut coarse grass.
WARNING: Read the warning instructions
that follow before you use the product.
10

Safety instructions for maintenance

• Use the trimmer head to cut grass.
• An incorrectly sharpened or damaged blade
increases the risk of accidents. Keep the teeth of the
blade correctly sharpened. Follow the instructions in
To sharpen the grass knife and grass blade on page
23 and use the recommended file gauge.
• Examine the cutting attachment for damage and
cracks. Replace the damaged cutting attachment.
• Only use cutting attachments with recommended
Accessories on page 27 .
guards. See
Trimmer head
WARNING: Always make sure the trimmer
line is wound tightly and evenly around the
drum to prevent harmful vibration.
• Only use recommended trimmer heads and trimmer
lines.
• Only use recommended cutting attachments.
• Smaller machines requires small trimmer heads and
vice versa.
• The length of the trimmer line is important. A longer
trimmer line requires greater engine power than a
shorter trimmer line of the same diameter.
• Make sure that the cutter on the trimmer guard is
intact. This cuts the trimmer line to the correct
length.
• Soak the trimmer line in water for a couple of days
before use to increase the life length.
• Stop the engine, make sure that the cutting
attachment stops and let the product cool down
before you do the maintenance.
• Disconnect the spark plug cap before you do the
maintenance.
1104 - 001 - 11.04.2019