RC10.4 70, RC10.4 90
Defrosting the cooling device
Humidity can form frost in the interior of the cooling device or on the vaporiser. This
reduces the cooling capacity. Defrost the device in good time to avoid this.
A
NOTICE!
Never use hard or pointed tools to remove ice or to loosen objects
which have frozen in place.
To defrost the cooling device, proceed as follows:
➤ Take out the contents of the cooling device.
➤ Place them in another cooling device to keep them cool, if necessary.
➤ Switch the cooling device off by pushing the
✓ The display switches off, a short beep sounds and the refrigerator is completely
switched off.
➤ Leave the door open.
➤ Wipe off the water resulting from defrosting or – if present – empty the collecting
tray. If your device has a water drain, drain the thawed water off.
Switching off and storing the cooling device
If you do not intend to use the cooling device for a long time, proceed as follows:
➤ Switch the cooling device off by pushing the
✓ The display switches off, a short beep sounds and the refrigerator is completely
switched off.
➤ Disconnect the power cable from the battery or pull the DC cable plug out of the
rectifier.
➤ Clean the cooling device (see chapter "Cleaning and maintenance" on
page 26).
➤ Leave the lid or door open to avoid unpleasant odours building up.
➤ Put the door lock to VENT position (fig. d, page 12).
This prevents odours from building up.
A
NOTICE!
The VENT position can only be used if the vehicle is not moving. When
moving the door can unlock and damage the refrigerator or the interior.
EN
button for five seconds.
button for five seconds.
Operation
25