Changing The Door Hinge; Connecting The Cooling Device - Dometic RC 10.4 70 Montage- Und Bedienungsanleitung

Setting up and connecting the refrigerator
7.2

Changing the door hinge

You can also change the hinge of the door, so that it opens to the left rather than the
right.
➤ To change the door hinge, proceed as follows (see fig. 3, page 4 to fig. 5,
page 5).
7.3 Changing the decorative plate
You can change the decorative plate on your cooling device to improve
the appearance.
➤ To change the decorative plate, proceed as follows (see fig. 6, page 6 to
fig. 7, page 7).
7.4

Connecting the cooling device

For the electrical connection you also need the wiring diagram (fig. 8, page 8).
Cable colours:
Abbrev. in
fig. 8,
Meaning
page 8
bk black
rd red
Connecting to a battery
A
NOTICE!
To avoid voltage loss and therefore a drop in performance, the cable
should be kept as short as possible and should not be interrupted if
possible.
For this reason avoid additional switches, plugs or power strips.
➤ Determine the required cross section of the cable in relation to the cable length
according to fig. 9, page 8.
20
RC10.4 70, RC10.4 90
EN