Albrecht AE5290 XL Bedienungsanleitung Seite 31

• If you briefly press the MEMO button again the set switches back to normal modus: the
stored number disappears from the display and you again will be able to see the number
of the channel last used.
The manufacturer has pre-programmed your AE 5290 XL for some commonly-used
channels:
• Channel 1 recommended call channel on FM
• Channel 9 international emergency and call channel
In Germany particularly this AM channel is also used by all truck drivers. This means: a large
number of stations are listening in. If the worst comes to the worst (e.g. in case of accident
etc.) there is a good chance that someone will be listening.
To call other stations, who you know are listening in on channel 9, you can also use this
channel. Call up the desired station on channel 9. As soon as contact has been made, agree
on a free channel for your conversation and then channel 9 will be free again for other calls.
An emergency channel can of course only work if as many stations as possible are listening
in. Therefore listen in to this channel as often as possible; the MEMO button will help you.
• Channel 19: Trucker channel in France, Spain and Italy.
• Channel 4:
• Channel 40 recommended calling channel in Switzerland
Programming Memo locations
You can re-programme each of the 5 numbers of the memory positions to any desired
channel (e.g. private channels or club channels):
• Choose when in normal modus the desired channel.
• Press the MEMO button (for around 2 seconds) until a memory position number
(1 to 5) appears next to the channel number and ME appears on the display.
• Using the channel switch choose the desired memory position number (1 to 5).
• Briefly press the MEMO button to save the number. To return to normal modus
turn the channel switch once, or one of the channel selection buttons on the
microphone.
Now the station is saved and will be stored.
Please note that the German channel numbers 41 to 80 can only be
stored and recalled when the country switch is in the position for 80/40
(Germany). Channels 41-80 do not appear in other country settings.
After changing any country settings, the previously stored memory
channels are not reset and remain as before.
Your AE 5290 XL has an automatic channel scan, which can be used for all channels and for
the stored channels.
First choose the mode of operation (normal channel modus or MEMO modus).
Adjust the muting control to the point at which the receiver should open (see also 'Adjusting
squelch').
• Briefly press the button SCAN.
recommended call channel on AM in Germany
Channel scan
Start channel scan
11