General Information; Relevant Documents; Safety Instructions; Other Symbols In This Documentation - STIEBEL ELTRON WPE Installationsanleitung

CoNTENTs | INsTALLATIoN

General information

INSTALLATION
1. General information ������������������������ 12
1.1 Relevant documents ������������������������� 12
1.2 safety instructions �������������������������� 12
1.3 other symbols in this documentation ����������� 12
1.4 Units of measurement ����������������������� 12
2. Safety ������������������������������������ 12
2.1 Intended use ������������������������������� 12
2.2 General safety instructions �������������������� 13
2.3 Instructions, standards and regulations ��������� 13
2.4 Test symbols ������������������������������� 13
3. Appliance description ����������������������� 13
3.1 standard delivery ��������������������������� 13
3.2 Accessories �������������������������������� 13
4. Installation �������������������������������� 13
4.1 Minimum clearances ������������������������� 13
4.2 Installation location ������������������������� 13
4.3 Preparations ������������������������������� 14
4.4 Wall mounting ������������������������������ 14
5. Electrical connection ������������������������ 14
5.1 Appliance connection ������������������������ 15
5.2 Connecting to the heat pump manager ��������� 15
5.3 Terminal assignment ������������������������� 16
5.4 sensor installation ��������������������������� 18
6. Closing the front fascia ���������������������� 18
7. Commissioning ���������������������������� 18
8. Troubleshooting ��������������������������� 19
9. Specification ������������������������������� 19
9.1 Details on energy consumption ���������������� 19
9.2 Data table ��������������������������������� 19
GUARANTEE
ENVIRONMENT AND RECYCLING
1. General information
This document is intended for qualified contractors.
Note
Read these instructions carefully before using the ap-
pliance and retain them for future reference.
Pass on the instructions to a new user if required.
1.1

Relevant documents

WPM operating instructions
WPM commissioning instructions
WPM installation instructions
12 |

1.2 Safety instructions

1.2.1 Structure of safety instructions
KEYWORD Type of risk
Here, possible consequences are listed that may re-
sult from failure to observe the safety instructions.
f Steps to prevent the risk are listed.
f
1.2.2 Symbols, type of risk
Symbol Type of risk
Injury
Electrocution
1.2.3 Keywords
KEYWORD Meaning
DANGER Failure to observe this information will result in serious
injury or death.
WARNING Failure to observe this information may result in serious
injury or death.
CAUTIoN Failure to observe this information may result in non-se-
rious or minor injury.

1.3 Other symbols in this documentation

Note
General information is identified by the adjacent sym-
bol.
f Read these texts carefully.
f
Symbol Meaning
Material losses
(appliance damage, consequential losses and environ-
mental pollution)
Appliance disposal
f This symbol indicates that you have to do something. The
f
action you need to take is described step by step.

1.4 Units of measurement

Note
All measurements are given in mm unless stated oth-
erwise.

2. Safety

only a qualified contractor should carry out installation, com-
missioning, maintenance and repair of the appliance.
2.1

Intended use

The appliance is intended for domestic use. It can be used safe-
ly by untrained persons. The appliance can also be used in a
WPE