Cleaning And Maintenance; Repair & Maintenance; Environmental Protection - Concept DV7300 series Bedienungsanleitung

EN
4. Fully uncoil the power cord.
5. Connect the power cord plug to the wall socket.
6. Apply the unit to the part of your body you want to warm through.
7. Using the mode selector, select the required level of power 1 - 3. The power level light indicator goes on accordingly.
We recommend beginning with a lower level of power and then increasing it as needed.
Note: Use level 1 for long-term operation. Higher levels of power are designed for short-term operation or to reach
the required temperature faster.
8. After use, set the mode selector to the 0 position and unplug the appliance from the mains.
Safety switch-off
After 90 minutes of operation, the unit will automatically switch off the warming function. By adjusting the power switch
to the 0 position (off) the safety switch-off timer will be reset and the unit may be reused.
Storing the unit
Unplug the unit from the mains after use, let it cool down and store it in a safe and dry place. The supply cable must not
be wound around the unit control!
Make sure no sharp folds are created. Never break the body of the unit or the supply cable.
Neither pierce the appliance (e.g. with pins, needles, etc.) nor expose it to sharp items.

CLEANING AND MAINTENANCE

WARNING!
Before cleaning the unit, always disconnect the power cord from the wall outlet!
Prior to handling, make sure the unit has cooled down!
The surface of the unit may only be cleaned using a wet cloth. Do not use any detergents or hard and sharp objects, as
they may damage the unit's surface! Do not use dry washing!
Never clean the unit under running water, do not rinse it, and do not submerge it in water!
The cloth covering may be washed according to instructions on its label (at 40°C).
Before reusing the unit, make sure its surface and covering are dry!
REPAIR & MAINTENANCE
Any extensive maintenance or repair that requires access to the inner parts of the product must be performed by an expert
service centre.

ENVIRONMENTAL PROTECTION

• Packaging materials and obsolete appliances should be recycled.
• The transport box may be disposed of as sorted waste.
• Polyethylene bags shall be handed over for recycling.
Appliance recycling at the end of its service life:
A symbol on the product or its packaging indicates that this product should not go into household waste.
It must be taken to the collection point of an electric and electronic equipment recycling facility. By making
sure this product is disposed of properly, you will help prevent the negative effects on the environment and
human health that would otherwise result from inappropriate disposal of this product. You can learn more
about recycling this product from your local authorities, a household waste disposal service or in the shop
where you bought this product.
DV7330, 40, 50 15