Mean; Cyclical Print (735-1 Only) - Testo 735 Bedienungsanleitung

6. Setting the instrument
48

6.2.3 Mean

The menu item Mean value calculation is only available in the instrument
testo 735-2. In the instrument testo 735-1, the function Mean value
calculation is called up with the function button
For carring out Mean value calculation see chapter Measuring, page 50.

6.2.4 Cyclical Print (735-1 only)

The Cyclical Print function can be activated/deactivated. A measuring program
for cyclical printing can be programmed. This enables readings (up to 999) to
be printed in a defined measuring cycle (min. 1min). The readings are sent to a
Testo printer.
Activating c c yclical p p rinting/programming a a m m easuring p p rogram:
The main menu is open, Menu is displayed.
cyc.Print
1
Press
2
with
The measuring cycle is set in the order: minutes/hours.
Press
3
Perform the setting for hours as described in step
4
Press
5
- The instrument returns to measurement view.
- The measurement series is programmed and cyclical print can be
6.2.5 Alarm
The alarm thresholds can be set. The default settings for the alarm thresholds
are the limit values for the measuring range.
If an alarm threshold is exceeded or undershot during a measurement, an alarm
tone is emitted.
testo 735-2 only: The alarm thresholds are related to the location. They are
only applied to the location that was activated in the setting.
nfo@Testo-Direct.com
.
OK
/ to select Off (deactivated) or On (activated) and confirm
.
OK
/ to set the measuring cycle in minutes and confirm with
.
OK
/ to set the number of readings and confirm with
started with .
Testo-Direct
www.
.
Mean
.
3
1.888.610.766
.com
.
OK