Language - Testo 735 Bedienungsanleitung

6. Setting the instrument
44
Press
3
channel no.
Assign the radio probe to the chosen channel no. with
4
function with
Te-Type
The probe characteristic curves stored in the instrument can be set for the
probe type used.
Setting p p robe t t ype:
The configuration menu is open, Config. is displayed.
Probe
1
Select the desired probe type with
2
Adjustment (735-2 only)
The function is only available if probe adjustment data are stored in the
instrument. The PC adjustment software testo 735-2 is required to store probe
adjustment data in the instrument. See documentation on this software.
Probe adjustment data stored in the instrument can be activated/deactivated.
Information on the adjustment data can be displayed.
Activating/deactivating a a djustment d d ata:
The configuration menu is open, config. is displayed.
Probe
1
Select On or Off with
2
If On is selected: With
3
adjusted probe is connected, and confirm with
- The activated adjustment data are displayed for your information.

6.1.5 Language

Setting t t he l l anguage:
The configuration menu is open, config. is displayed.
Language
1
Select the desired language with
2
nfo@Testo-Direct.com
/ to select the probe that is to be assigned to the chosen
, without changing the probe configuration..
ESC
Te-Type
OK
Adjustm.
OK
/
/
.
OK
Testo-Direct
www.
.
OK
/ and confirm with
.
OK
and confim with
, select the probe socket to which the
/ and confirm with
or exit the
OK
OK
.
OK
.
OK
.
OK
1.888.610.766
.com
.