Setting Stimulation Intensity - Num'axes CANIFUGUE Gebrauchsanleitung

- Checking the stimulation zone:
Same as above: when you enter the stimulation zone, the test lamp lights. If you think this
distance is too great, go back to the transmitter. Push the slider to a lower level: this will
reduce the stimulation zone. Check this new setting on your property.
Important: zone width varies depending on the length of antenna wire laid out on the
property. The longer the antenna wire, the narrower the zone.

Setting stimulation intensity

The CANIFUGUE collar is equipped with 8 modes so you can adapt the level of
stimulations to the size and sensitivity of your dog.
To change the mode, the collar must be switched on (battery in its housing).
Opening the battery cover gives you access to the push button indicated by a pointer (cf.
Diagram No. 2).
Gb - 25