Throttle Trigger - Sandrigarden SG 950/45 CS Bedienungsanleitung

GB
A18 – DANGER FROM KICK-
BACKS
Kickbacks can cause lethal
wounds.
In a kickback, the chainsaw is thrown
violently against the operator.
This reaction may occur in the
following cases.
1) Start of the cut with the point of the
bar.
2) Accidental contact with other
branches, trunks, solid bodies, or
metalwork.
3) Cut with the top part of the bar.
- Keep the spike (Fig.1
part.6) against the wood while cut-
ting.
- Cut with the chain sharp and taught.
- Into a cut that has already been
started, insert the chain at top speed
and very attentively.
- Extract the bar from the cut only with
the chain in movement.
SAFETY DEVICES ON THE CHAINSAW
The chainsaw must be held with the
left hand on the front handle and
the right on the rear handle (this
applies to left handed people, too).
The safety devices have been de-
signed to function with the hands
in those positions.
Your chainsaw is provided with the
following safety devices.
B1 - THROTTLE TRIGGER LOOK-
OUT(see Fig.1 part.9) prevents acciden-
tal operation of the accelerator lever.
38
CHAIN SAW OPERATING MANUAL

THROTTLE TRIGGER

part.10). DANGER: Warning. The
cutting chain may continue to rotate
for a certain time after the accelera-
tor lever has been released.
B2 – STOP SWITCH (Fig.1 part.12)
With the lever down [STOP
engine is stopped.
B3- SAFETY CHAIN BRAKE Your
chainsaw is provided with a safety
chain brake (Fig. 1 part. 7) which can
stop the chain in a fraction of a second
(in the event of a kickback).
B4 – CHAIN CATCHER (Fig. 1 part.
2). This device prevents the chain
from being thrown in the event of it
breaking (or coming out of the bar)
during operation.
On each occasion, before use
check that all the safety devices
function perfectly.
If they do not, do not use the
chainsaw and contact a qualified
service centre for the repair.
3. DESCRIPTION OF PARTS OF THE
MACHINE DESCRIPTION FIG.1
1) Rear hand guard
2) Chain catcher
3)
Chain
4) Chain guide bar
5) Bar cover
6) Spike
7) Front hand guard / Chain safety brake
lever
8) Front handle
9) Throttle trigger look-out
10) Throttle trigger
(Fig.1
] the