General Description; Summary - Gewiss Chorus GW 10 761 Bedienungsanleitung

Easy wall Timer-Thermostat allows you to automatically manage the temperature in the
area it is installed in on a weekly basis. The temperature is regulated by the KNX/EIB
actuators which are managed by the Home Automation KNX/EIB bus and control the
heating or air-conditioning systems. When combined with the Easy wall Timer-
Thermostats (GW10 763 - GW14 763 ), from which it receives the function type and
mode via the bus, it is possible to create multi-zone thermal regulation systems.
The temperature profiles are defined on a weekly basis. It is possible to programme an
independent time profile for each day of the week, with a 15 minute resolution and without
limits to the daily variations. The timer-thermostat comprises:
• 2 function types: heating and air conditioning;
• 5 function modes: OFF, Economy, Precomfort, Comfort and Automatic;
• 4 temperature settings for the heating function (T
• 4 temperature settings for the air conditioning function (T
T
HIGH TEMPERATURE PROTECTION
• 2 control algorithm which can be set locally: with 2 points (ON/OFF command) and PI
(PWM type control).
The timer-thermostat is powered by the supplied bus line and is fitted with a timed backlit
LCD display, 10 control buttons, an integrated sensor to detect the ambient temperature (the
value of which is sent to the bus every 15 minutes), alkaline batteries (AAA) to maintain the
date and time on the display should the power be disconnected from the bus.
The output channels can be configured to:
• send the ON/OFF command to the KNX/EIB actuators that control the thermal regulation
system (max 2 for heating / air-conditioning);
• set the function type (heating/air-conditioning) and function mode (OFF/Economy/
Preconformt/Comfort)) for the zone thermostats;
• transmit the settings (function type and mode) and the current data (read temperature)
to other devices, for instance the EASY GSM repeater – GW 90 861.
The input channels can be configured to:
• remotely control the timer-thermostat function type and mode with other KNX/EIB
devices (for instance the Easy GSM remote control unit - GW 90 861);
• manage scenes, associating a function type or mode to a specific scene;
• manage an incoming signal, for instance a contact when a window is opened, to
temporarily switch off the timer-thermostat.
The device is installed on the wall using the supplied flange that can be fixed to the wall
using dowels or screwed onto a 3 module flush-mount box.
GENER L DESCRIPTION

Summary

),
39
, T , T
ECONOMY PRECOMFORT COMFORT
, T
ECONOMY PRECOMFORT
E
N
G
L
I
S
, T );
FROSTPROTECT
H
, T ,
COMFORT