Low Battery Indicator; Reset And Reinstatement Of Default Settings; Low Batteries - Gewiss Chorus GW 10 761 Bedienungsanleitung

Reset and reinstatement of default settings

Press the ,
Caution: all the previously set parameters and customised programmes will be
cancelled.
When it is turned back on, the timer-thermostat will use the default factory settings.
The timer-thermostat will be set to heating, in OFF mode and the Party and Holiday
functions will not be enabled.
USER INSTRUCTIONS

Low Battery indicator

When the batteries are low and there is not bus power
the symbol will start to flash on the screen.
The temperature indications also disappear from the
screen and it is necessary to replace the batteries as soon
as possible.
When the
essential to replace them immediately.
The batteries are only used to preserve the time and date
settings when there is no bus KNX/EIB power (all the other
settings are stored in the non-volatile memory).
When the bus power is present it will always function
even without batteries.
and keys all together to completely reset the timer-thermostat.
symbol is ON with a fixed light, it is
58