Appliance Self-Test; Starting The Appliance Self-Test; Ending The Appliance Self-Test; Customer Service - Siemens KG N Serie Gebrauchsanleitung

Appliance self-test

Your appliance features an automatic
self-test program which shows you
sources of faults which may be repaired
by customer service only.

Starting the appliance self-test

1. Switch off the appliance and
wait 5 minutes.
2. Switch on appliance and press and
hold the button „-" for 3-5 seconds
within the first 10 seconds, until an
audible signal sounds.
The self-test programme starts.
While the self-test is running, a long
acoustic signal sounds.
When the self-test ends and an acoustic
signal sounds twice, your appliance is
in working order.
If 5 audible signals sound, there is an
error. Inform customer service.

Ending the appliance self-test

When the programme has ended, the
appliance switches over to normal
operation.

Customer service

Your local customer service can be
found in the telephone directory or in
the customer-service index. Please
provide customer service with the
appliance product number (E-Nr.) and
production number (FD-Nr.).
This information can be found on the
rating plate. Fig. ,
To prevent unnecessary call-outs, please
assist customer service by quoting
the product and production numbers.
This will save you additional costs.
Repair order and advice
on faults
Contact information for all countries can
be found on the enclosed customer
service list.
GB 0344 892 8999
IE 01450 2655
US 866 447 4363
en
Calls charged at
local or mobile rate.
0.03 € per minute
at peak. Off peak
0.0088 € per
minute.
toll-free
43