Getting To Know Your Appliance - Siemens KG N Serie Gebrauchsanleitung

en
The appliance complies with protection
class I. Connect the appliance t
o 220–240 V/50 Hz alternating current
via a correctly installed socket with
protective conductor. The socket must
be protected by a 10 A to 16 A fuse.
For appliances operated in non-
European countries, check whether the
indicated voltage and current type match
the values of your electricity supply. This
information can be found on the rating
plate, Fig. ,.
m
Warning
Never connect the appliance
to electronic energy saver plugs.
Our appliances can be used with mains
and sine-controlled inverters. Mains-
controlled inverters are used
for photovoltaic systems which
are connected directly to the national
grid. Sine-controlled inverters must be
used for isolated applications (e.g. on
ships or in mountain lodges) which are
not connected directly to the national
grid.
Getting to know your
appliance
Please fold out the illustrated last page.
These operating instructions refer
to several models.
The features of the models may vary.
30
The diagrams may differ.
Fig. !
* Not all models.
A Refrigerator compartment
B Freezer compartment
1–8 Controls
9* Butter and cheese compartment
10 Shelf for small bottles
11 Shelf for large bottles
12 Light
13* Vario door shelf
14* Bottle shelf
14 Cold storage compartment
15 Vegetable container with humidity
control
17 Frozen food container
Controls
Fig. $
* Not all models.
1
Refrigerator compartment
display panel
2
Freezer compartment display
panel
3
Temperature display freezer
compartment
The numbers correspond
to the set freezer compartment
temperatures in °C.
4
Button "lock" function
If this function is switched on, no
settings are possible via
the controls.
5
Alarm button
Used to switch off the warning
signal, see chapter "Alarm
function".