3M Elite 28737 Originalanleitung Seite 7

• Contact your local government for information regarding the collection systems available.
• Dispose of tool according to all local, state & federal regulations.
3M Disc Pads are perfectly mated for use on the 3M Sander. Constructed from premium, industrial-quality materials, their durability and precise construction are
the ideal complement to the performance of the 3M Sander. See Product Configuration/Specifications table for the correct replacement pad for a particular model.
The following chart is a sample of products offered.
UPC 3M PN
00051111501986 02345
00051111558331 02727
00051144825653 82565
00051111501986 02345
00051141286556 28655
00051144134427 13442
00051111603116 67415
00051111511503 02511
00051111609002 02787
00051141285849 28584
See 3M ASD Accessory catalog 61-5002-8098-9 for additional Disc Pads and Accessories.
Product Use: All statements, technical information and recommendations contained in this document are based up on tests or experience that 3M believes are
reliable. However, many factors beyond 3M's control can affect the use and performance of a 3M product in a particular application, including the conditions under
which the 3M product is used and the time and environmental conditions in which the product is expected to perform. Since these factors are uniquely within the
user's knowledge and control, it is essential that the user evaluate the 3M product to determine whether it is fit for a particular purpose and suitable for the user's
method of application.
Warranty and Limited Remedy: 3M warrants this tool against defects in workmanship and materials under normal operating conditions for one (1) year from
the date of purchase. 3M MAKES NO OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANT-
ABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR ANY IMPLIED WARRANTY ARISING OUT OF A COURSE OF DEALING, CUSTOM OR USAGE OF TRADE. User is
responsible for determining whether the 3M tool is fit for a particular purpose and suitable for user's application. User must operate the tool in accordance with all
applicable operating instructions, safety precautions, and other procedures stated in the operating manual to be entitled to warranty coverage. 3M shall have no
obligation to repair or replace any tool or part that fails due to normal wear, inadequate or improper maintenance, inadequate cleaning, nonlubrication, improper
operating environment, improper utilities, operator error or misuse, alteration or modification, mishandling lack of reasonable care, or due to any accidental cause.
If a tool or any part thereof is defective within this warranty period, your exclusive remedy and 3M's sole obligation will be, at 3M's option, to repair or replace the
tool or refund the purchase price.
Limitation of Liability: Except where prohibited by law, 3M and seller will not be liable for any loss or damage arising from the 3M product, whether direct,
indirect, special, incidental or consequential, regardless of the legal theory asserted, including warranty, contract, negligence or strict liability.
Submitting a Warranty Claim: Contact your dealer when submitting a warranty claim in accordance with the restrictions listed above. Please note that all
warranty claims are subject to manufacturer's approval. Be sure to keep your sales receipt in a safe place. This must be submitted when filing a warranty claim,
within 1 year from the date of purchase. For additional assistance call 1-800-362-3550.
3
Abrasive Systems Division
3M Center
St. Paul, MN 55144-1000
Recommended Accessories & 3M
Description
3M™ Finesse-it™ Roloc™ Sanding Pad 02345, 1-1/4 in
3M™ Stikit™ Roloc™ Disc Pad 02727, 1-1/4 in x 5/16 in
3M™ Hookit™ Roloc™ Disc Pad Type J 82565, 1-1/2 in
3M™ Finesse-it™ Roloc™ Sanding Pad 02345, 1-1/4 in, 20 per case
3M™ Hookit™ Roloc™ Disc Pad 28655, 1-1/4 in x 5/16 in
3M™ Finesse-it™ Roloc™ Sanding Pad 13442, 1-1/4 in
3M™ Hookit™ Roloc™ Disc Pad 67415, 1-1/16 in x 5/16 in
3M™ Finesse-it™ Roloc™ Sanding Pad 02511, 1-1/4 in
3M™ Hookit™ II Roloc™ Disc Pad 02787, 1-1/4 in
3M™ Finesse-it™ Roloc™ Sanding Pad 28584, 1-1/4 in, Small Button
Disc Pads
™
7
www.3M.com/abrasives
© 3M 2014.
3M, Finesse-it, Hookit, Stikit and
Roloc are trademarks of 3M.
34-8712-3843-1