Measurements - CONDTROL Vector 100 Bedienungsanleitung

LASER DISTANCE METER
EN

MEASUREMENTS

Single distance measurement
Short press The device will switch on.
Laser beam will switch on.
Short press
Point the laser beam at the object of measurement.
Short press Make a single distance measurement.
- Measurement result
Short press Delete the last measurement result.
10
Vector 100 CONDTROL
User manual
LASER DISTANCE METER
EN
Continuous distance measurement (Tracking)
Activate continuous measurement mode. The laser
Press and hold
beam is also activated. Symbol
during 2 seconds
on the display.
- maximal value
- minimal value
- current value
Short press Stop continuous measurement.
The last measured values are shown on the display.
or
Short press Exit the mode.
Vector 100 CONDTROL
User manual
appears
11