Removing Collected Water
There are 2 ways to remove collected water:
1
Use the continuous drainage option from the bottom hole
Note:
When using the continuous drainage option from the bottom hole, install
drainage pipe before using, otherwise poor drainage will affect normal
operation of the unit.
■ Instructions for drainage pipe installation as follows.
1. Remove the rubber plug at drainage port.
2. Fix the drainage pipe clip on the right of rear side plate near drainage port with
a screw.
3. Put the drainage pipe into drainage port and screw it up, and then bind it with
pipe hoop.
drainage port
drainage port
drainage pipe
pipe hoop
22
73
drainage pipe clip
screw
rubber plug
pipe hoop
drainage
pipe clip
EN