Regular Maintenance Work - Advantech DLT-V83 series Sicherheitshinweise Und Installationsanleitung

9

REGULAR MAINTENANCE WORK

General
To avoid damage to the DLT-V83 and to ensure safe functioning:
− Depending on the load and environmental conditions, check at least once per month,
and more often if necessary, that all connected cables are secured and that the
cable cover is tightly sealed (important for IP protection against dust, etc.).
Cleaning the device
There is a danger of electric shock if live parts of the DLT-V83 are touched during
cleaning.
− Switch off the DLT-V83 before cleaning.
− Disconnect from the power supply.
− Disconnect connected accessories.
− Clean the touchscreen and housing with a damp cloth and a neutral glass cleaning
agent.
− Do not use any chemicals such as benzene, thinner or acidic/alkaline solutions for
cleaning.
− Do not use any compressed air or high-pressure cleaning equipment.
Devices used in vehicles
DLT-V83 devices used in vehicles are subject to high loads due to vibration and shocks.
To ensure the secure fastening of the device to the vehicle, the following points must be
checked at least once a month, and where necessary more often, depending on the
load and environmental conditions:
− Check that the DLT-V83 is securely positioned in the corresponding mount (e.g. in
the RAM mount or in the mounting bracket).
− Check that all fastening elements are correctly secured (e.g. screws, etc.).
− Check that the mounting with the DLT-V83 is securely fastened to the vehicle.
11