Advantech DLT-V83 series Sicherheitshinweise Und Installationsanleitung Seite 12

6 INFORMATION ON SAFE MOUNTING
During the mounting process
The DLT-V83 can fall down and cause injuries due to its weight.
− Use the assistance of a second person for installation work.
− Always hold the DLT-V83 by the housing with both hands.
− Never use the antenna cap as a handle as it may break due to the weight involved.
The strain relief rail of the DLT-V83 can have sharp edges and cause cutting injuries.
− Do not hold the DLT-V83 by the strain relief plate.
Choosing the mounting position and installation environment
− The installation height of the DLT-V83 device shall not exceed 2 m.
− The ergonomic operability of the DLT-V83 should be taken into account when
selecting the mounting position.
− Mount the DLT-V83 in such a way that no persons can be injured if the device
mounting should break (e.g. as a result of a fatigue fracture).
− Otherwise, it is essential to adopt corresponding safety measures.
− Ensure that the installation environment is correct, as is not permitted to result in an
enclosed system because the cooling concept of the DLT-V83 requires a fresh air
supply. Without a supply of fresh cooling air, the DLT-V83 may overheat and may be
damaged beyond repair.
Specific information on vehicle mounting (forklifts, etc.)
− Mount the DLT-V83 so that the driver's field of view remains clear and safe driving
operation is guaranteed.
− During the mounting process, observe the requirements of the vehicle manufacturer
relating to attaching auxiliary devices and connecting auxiliary consumers.
− Observe all requirements relating to welding or drilling on support components of the
vehicle.
− Observe the more detailed information on the mounting process given in the "DLT-
V83 Operating Instructions" available online, for example on the potential conditions
on vehicles, requirements for electrically isolated mounting, etc.
8