Clas Ohlson Y630 Bedienungsanleitung Seite 4

Lighting on/off
Press the [ / ] button to turn the lighting on or off.
Bluetooth on/off
Press the remote's Bluetooth button [ ] to activate Bluetooth. Four short low-to-high
beeps will be heard.
The speaker will automatically re-connect with the last device it was paired to, if the device
is on and its Bluetooth function is activated. Two muted signals will be heard.
Press the remote's Bluetooth button [ ] to deactivate the speaker's Bluetooth function.
Four short high-to-low beeps will be heard.
Pairing the speaker to another Bluetooth device
1. Activate Bluetooth on the device to be paired with the speaker.
2. Press [ ] to activate Bluetooth. Four short low-to-high beeps will be heard.
3. Press the [ PAIRING ] button (21) to activate pairing mode. Two high-toned beeps will
be heard.
4. The speaker will appear on your device as Y630A, select it and pair it with your device.
Refer to your device's instruction manual for further clarification if you are unsure.
Note: If you are prompted to enter a PIN code on your device, enter 0000 (4 zeroes).
Certain devices may also require you to approve the connection.
5. Once the device is successfully paired, the speaker will emit two muted beeps.
6. Start playback on your device. Set the desired volume levels both on your device
and the speaker. Control the other playback settings on the external device and on
the speaker.
7. The speaker will automatically re-connect with the last device it was paired to once
the speaker is turned on again, if the device it was connected to is on and has
Bluetooth activated.
Speaker's function button
• Quick-press the button to turn the lighting on/off.
• Quickly press again to change the color.
• Press and hold the button for 2 seconds to turn on Bluetooth. Four short low
to high beeps will be heard.
• The speaker will automatically re-connect with the last device it was paired to,
if the device it was connected to is on and has Bluetooth activated. Two muted
signals will be heard.
• Press and hold the button for 3 seconds to turn off Bluetooth. Four short
high-to-low beeps will be heard.
• With the speaker turned off, push and hold the button for 4 sec to activate pairing
mode. Four low-to-high beeps will be heard followed by 2 short high-toned beeps.
4