Operation - Clas Ohlson B100 Bedienungsanleitung

Connecting
Connect the speaker cable provided between the connections on the speakers (13)
and (14).

Operation

Switching the speaker dock on
1. Plug the iron in to a wall socket.
2. Switch [ ON OFF ] on the back of the speaker to the ON position.
3. The speaker will enter Bluetooth mode automatically. The Bluetooth indicator light
(4) will flash green.
4. Press and hold down [ M/STANDBY ] for approx. 3 seconds to enter standby
mode. The indicator light for LINE IN and BLUETOOTH will go out but will flash to
indicate standby mode.
5. To turn off the speaker completely, switch [ ON OFF ] on the back of the speaker to
the OFF position.
Setup
• Press [ M/STANDBY ] to select the audio source.
• Turn the volume knob to set the volume.
Bluetooth
1. Press [ M/STANDBY ] to enter Bluetooth mode. The indicator light (4) will flash green.
2. Activate Bluetooth on the device to be paired and place the device in search
mode. Select "38-5646" or "B100".
3. If you are prompted to enter a PIN code on your device, you should enter 0000
(four zeros). Certain devices may also require you to approve the connection.
4. When the connection is ready, the indicator light (4) will show green. You can now
play music from your device.
5