Main Components; Safety Devices - ATH-Heinl ATH Comfort Lift 2.30 Bedienungsanleitung

Inhaltsverzeichnis

Main components

1. Pillars

The inside lifting-carriage is lifted by hydraulic cylinder due a chain to the top.

2. Hydraulic-Aggregate

The hydraulic oil is pumped to the hydraulic cylinders by a gear wheel pump actuated by an electrical motor. Over

a lowering valve the hydraulic oil will be returned in the oil tank..

3. Lifting arms

Due the lifting arms the cars could be lifted.

4a. Cross beam ATH-Comfort Lift 2.XX a/s) Over

driving metallic cover protects the synchronization ropes

and the hydraulic hose

5. Control box from the main column equipped with Deadman's Type Controls

Includes the complete electrical control system. All the push buttons are protected by a front ring and the operator

is required to hold the controls in the engaged position to rise or lower the lift in case of releasing operation is

immediately interrupted.

5'. Control box from the opposite column

6. Automatic Arm Restraint

To prevent swinging motions of arms when vehicle is on lift when the carriage is rising up.

Locked position of the lifting arms:

4b. Cross beam

(ATH-Comfort Lift 2.XX_L& 2.XX_X a/s )

4b'. Reinforcing profile for Cross beam

Unlocked position of the lifting arms:

Inhaltsverzeichnis