Ethernet Connection - Lenze E94AYCEN Montageanleitung

Ethernet connection

You can use a standard Ethernet patch cable for connecting the communication module to
the fieldbus (see "Ethernet cable specifications" (^ 36)).
)
Note!
Isolate your Ethernet home network from the operating network for
ƒ
Ethernet−capable Lenze devices to avoid Ethernet communication errors.
More information about this can be found in the Manual "Ethernet in
industrial applications".
Plug/remove the Ethernet cable plug vertically into/from the socket to
ƒ
make sure that the RJ45 socket will not be damaged.
Pin assignment
RJ45 socket
I
Tip!
The Ethernet interfaces are equipped with an auto−MDIX function. This
function adapts the polarity of the RJ45 interfaces such that independently of
the polarity of the opposite Ethernet interface and the cable type used
(standard patch cable or crossover cable) a connection is established.
EDK94AYCEN DE/EN/FR/ES/IT 6.1
PIN
1
2
3
4
5
6
7
E94AYCXX004C 8
l
Electrical installation
Ethernet connection
Signal
Tx +
Tx −
Rx +
−
−
Rx −
−
−
5
35