Changing Carrier Frequencies - AKG HT 40 series Bedienungsanleitung

HT 40_2007_Hex:Layout 1
4. Set the frequency selectors on the transmitter and receiver for channel 3 to "3".
5. Set up the transmitter and receiver for channel 1.
6. Repeat steps 1 through 5 for channels 2 and 3.
• Never operate two or more wireless channels on the same frequency at the same
time and location. This would cause unwanted noise due to radio interference.
• Prior to changing a carrier frequency, be sure to switch the transmitter off. To activate
the new carrier frequency, switch the transmitter back on.
HT 40 PRO/FLEXX
01/14/2008 17:08 Seite 21 (Schwarz/Black Auszug)
3 Setting Up
L
3.7 Changing
Carrier Frequencies
Important!
21